Table of Contents
Advertisement
HOW TORELABEL INPUT DISPLAYS
The input label function can be used to replace the input
displays; such as LD, VIDEO 1, VIDEO 2 or VIDEO 3; with the
model numbers or model names of the components
that are
connected
to the monitor For example, you can display _LD.
$2' on the screen when selecting the LD input source.
The input label can be up to 8 characters long the 43 characters,
including
_ (space), listed be_ow.
Turn on the monitor and select the input (LD or VIDEO)
that you wish to replace with the model number of the unit
connected
to the monitor.
Example: Replacing the LD display with model number
'LD-S2'.
Press the MENU ONIOFF button, and then press the
MENU SELECT/ADJUST buttons until the INPUT LABEL
display turns red.
Press the MENU SET button. 'LD' will appear in the dght.
hand corner of the screen.
Press the MENU SELECT/ADJUST
buttons to select
the desired character.
• Press the + or - button repeatedly until the desired
character appears.
Press the MENU SET button to set the selected charac-
ter.
_-_
If you wish to select additional characters,
repeat steps
4 and 5.
Z_
Press the MENU ON/OFF button once when you finish
replacing the input labels.
Now you can display the model number by pressing the re-
mote contro_ INPUT SELECTOR
key or the control panel
INPUT SELECTOR
button.
MENU ON/OFF button
SELECT,I
AC_JLJST
MENU SELECT/
ADJUST buttons
NOTE:
• The following 43 characters,
including
_ (Space), can be
seledted.
_qBCDEFGH I JKLMNOPORSTUUI_XYZ0123456789
: <>-.
"_':1
It
Space
]
OMake sure to press the MENU SET button after selecting
the character.
MENU SET button
L0
CONVERGENCE
_U _EMORY
DPO BASE
[INPUT L_BELI
TV-C_TU _OOE
TUNER PRESET
SYSTEM MODE
&666&
LD-S2
LD
LD-S2
31
Advertisement
Table of Contents
