Controls And Displays; Front Panel - Pioneer VSX-520-S Operating Instructions Manual

Controls and displays

Chapter 2:
Controls and displays

Front panel

1 2
3
STANDBY/ON
SPEAKERS
INPUT
SELECTOR
 STANDBY/ON
1
2 INPUT SELECTOR dial
Selects an input source.
3 MCACC indicator
Lights when Acoustic Calibration EQ (page 34)
is on (Acoustic Calibration EQ is automatically
set to on after the Auto MCACC Setup
(page 27)).
4 Remote sensor
Receives the signals from the remote control
(see Operating range of remote control on
page 10).
5 SPEAKERS
Use to change the speaker system on or
off. When the SP OFF is selected, no sound
is output from the speakers connected to
this receiver.
Note
1 The Pre Out setting may or may not be displayed, depending on the input source you have selected.
4 5
PHASE
CONTROL
DIMMER DISPLAY BAND
PHONES
LISTENING MODE
AUTO/DIRECT STEREO/ALC STANDARD ADV SURROUND
9 10
6 7
TUNE TUNER EDIT PRESET
SOUND RETRIEVER
MCACC SETUP MIC
11
DIMMER
Dims or brightens the display. The
brightness can be controlled in four steps.
DISPLAY
Switches the display of this unit. The
listening mode, sound volume, Pre Out
setting or input name can be checked by
selecting an input source.
6 Character display
See Display on page 11.
7 Tuner control buttons
BAND
Switches between AM, FM ST (stereo) and
FM MONO radio bands (page 43).
TUNE /
Used to find radio frequencies (page 43).
8
VSX-520
AUDIO/ VIDEO MULTI- CHANNEL RECEIVER
ENTER
MASTER
VOLUME
12
1
02
9
En