Table of Contents
Advertisement
REMOTE
CONTROL
UNIT FACILITIES
9:
MUTE
Press to temporarily
turn off the sound. Press again to return to the
previous volume level. Th_s is useful, for example,
when answering
telephone.
The volume display will turn red while the mute function is engaged.
If the mute function is left on for over approx
10 minutes, the function
wdl be cancelled automatically, and the volume level will be reset to 0,
The volume display will disappear from the screen when the mute func-
tion is cancelled
U0L 20 IIIIlUlII......
't_; VOLUME
+,
-
Press the + key to increase the volume, and the -
key to decrease
it. Volume adjustment
will appear on the screen as numbers and a
bargraph.
'63' indicates the maximum
volume level.
The display will disappear from the screen after 4 seconds.
• Volume display will change color automatically according to the selected
input mode.
U0L 20 IIIIIIlUl......
(_)
D-SOUND
EXPANSION
(Dynamic
Sound Expansion)
Press once to display the current channel and/or other information on
the screen approx. 4 seconds.
_._"£HEI_TER
DSE OFF_J _'- S STEREO
3_: DISPLAY
Press once to display the current channel and/or other information
on
the screen.
'13'CH SCAN (Channel
scan)
Press to display 4 (or 9) memorized TV stations on the split screen at
the same time. After pressing the CH SCAN key, use the MULTI key to
select 4 station display mode or 9 station display mode.
Channel
Scan Features
When 4 screen or 9 screeen mode is selected, use this feature
to select one of the television stations curretly displayed for full
- screen wewing.
Press the Channel call 10-key lhat correspond to the channel
that you w,sh to watch
,_414, CH RETURN
(Channel
return)
Press to switch between the current channel and the channel you were
watching immediately before This is useful, for example, if you wish to
switch back and forth between two sporting events,
TU CH
2L_
I_'
DPO (Dynamic
Picture
Optimizer)
You can turn DPO on or off as desired, When DPO is on, it automatically
adjusts the picture to compensate for room illumination. For details, see
page 36..
NOTE:
eWhen the DPO button is pressed and held for more than 2 seconds,
the hnear white system will be turned off and "LINEAR WHITE OFF"
will appear on the screen. The linear white system _ll resume opera-
t!on approx. 4 seconds after the DPO button is released
DPO 0N
I_
VNR (Video
Noise Reduction)
You can turn VNR on or Off as desired. When VNR is on, the noise on
the screen is reduced.
For details, see page 17.
(_
SOUND
Press to select the sound parameter to be adjusted.
_-'_
B_SS _
TREBL --
BI_LNC '_._
ADJUST
Press the t> key to increase the value of the item currently selected us-
tng the PICTURE key or SOUND key. and the .,_ key to decrease it.
- d,sp,aye,
TREBL
0
in red
BnLNC
0
example: SOUND ADJUST display
15
Advertisement
Table of Contents
