Avmemory - Pioneer SD-P4053 Operating Instructions Manual

AVMEMORY
After making adjustments, you can store your picture and
tone quality settings in the two AV MEMORY presets. Follow
the procedure below.
Storing a Setting
_ Watch a TV show, video tape, or video disc.
_2 Adjust the picture and tone using the PICTURE key,
SOUND key and ADJUST key.
3__ Press the MENU ON/OFF button to display the MENU,
and press the MENU SELECT/ADJUST buttons until
the AV MEMORY display turns red.
_- Press the MENU SET button.
_ Press the MENU SELECT/ADJUST button to select the
AV memory (AV MEMORY 1 or AV MEMORY 2) in
which the setting is to be stored. The unlocked display
( D q ) will appear on !he screen next to the selected AV
MEMORY.
_- Press the MENU SET button to store the settings in AV
memory. Upon completion of memory storage, the
locked display ( _ ) appears on the screen.
Press the MENU ON/OFF button to return to normal
operation.
Recalling a Setting
Press the STD/AV MEM key on the remote control unit.
Each press of the STD/AV MEM key moves the selection
from STANDARD to AV MEMORY 1, to AV MEMORY 2, dis-
play off and then back to STANDARD again.
(Press the key while the prevuous legend is still on the
screen, otherwise, it will return to the STANDARD setting.)
Returning to the Standard Setting
Press the STD/AV MEM key so that the screen shows
STANDARD.
Recalling a setting with the STD/AV MEM key on
the control panel
Press the STD/AV MEM button repeatedly to recall a setting,
as described above for the remote control operation keys.
NO TE:
oAdjustments mode to the AV memory, bass and treble
tone, etc. will only affect the output from the AUDIO OUT-
PUT (VARIABLE) jacks.
All other signals output from the Projection monitor will be
unaffected.
Only the original output signal is sent through the monitor
output jacks.
MENU ON/OFF button
I
r _Sl_,r_L = _ _ ] P_ESET "-_ENU
MENU SELECT/ |
ADJUST buttons MENU SET
button
STD/AV MEM key ADJUST keys
r---n
m e5" '1 1if5
•
1
PICTURE key SOUND key
,:__ ,-. r ,;%E L ,_ C.LLj_I E _ _,,_., i 'C_
_ ! . i I !
!
STD/AV MEM button
AV Memory assignment
AV memory can be assigned to a selected input source: TV,
LD or VIDEO. For example, the AV memory settings for TV
can be stored in the STANDARD mode, LD settings in AV
MEMORY 1 and VIDEO settings in AV MEMORY 2.
Press the input selector key repeatedly to select the desired
input source, then press the STD/AV MEM key repeatedly to
recall the desired settings.
35