Tv Channelselection - Pioneer SD-P4053 Operating Instructions Manual

Projection monitor receiver
Table of Contents

Advertisement

TV CHANNEL SELECTION
The Praiection
Monitor uses a frequency synthesizer
tuning system to permit
reception of up to 127 channels (including cable channels}, This electronic tun-
ir_gsystem gives you _wo ways of selecting channels.
You can use the remote control keys numbered
"0" through "9" to di=ectly input
the channel
number. Or you can use the two CHANNEL
keys marked '+'
and
"--" on the remote control unit or the CHANNEL buttons marked '+" and "--" on
the control panels to select one channel after another, in the latter case. you can
remove or add channels to "TUNER
PRESET"
so that it con!ains only those
channels that you usually watch.
usually watch.
The 127 possible channels include broadcast TV channels 2--13
(VHF), 14--
69 (UHF), as well as cable (CATV) channels 1--13 (VHF), 14--22 (mid--band).
23--36
(super--band),
37--65
(hyper--band),
and 94-99 (mid-band).
NOTE:
e TUNER PRESET refers to channel
access by pressing the CHANNEL keys
marked
.4-" and "-".
You can specify which channels are to be included in
TUNER PRESET before using this function. Details follow.
BROADCAST
TV CHANNEL
SELECTION
(When
the
VHF/UHF
antenna
is connected
to the ANTENNA
terminal
on the rear panel,)
1
Press the INPUT SELECTOR button so that "TV CHXX" appears on the
monitor screen, or press the 13/input selector
key on the remote con-
trot unit.
IX
Setect channels directly by pressing the channel number on the remote
control "CHANNEL
CALL" 10-key pad. For example, to recetve channel
"23", press 2 and then 3, For channels 2 through 9, first press 0 (zero), then
the number: or just press the number and wait for about four seconds.
(While waiting for you to input a second digit, the first digit blinks. If you do
not input a second digit within 4 seconds, then the first digit is selected as
the channel number.)
_3
Channel
memory selection is also possible. Using the CHANNEL
keys
marked
"+" and "-"
on the remote control unit or CHANNEL
buttons
marked "+" and "--" on the control panel you can scan through the chan-
nels which are in tuner preset. To add or delete channels from memory,
see TUNER PRESET on page 32.
TV Input selector key
J
i
Channel call 10-key pad
!
TV CHANNEL key
27

Advertisement

Table of Contents
loading

Table of Contents