Pentax K-X Operating Manual page 76

iiiiiiiiiiiiii
iiiiiiiiiiiiii
iHHHHHHi
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iHHHHHHi
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iHHHHHHi
8
7
8
Press the
OK
button.
Manual _1_1
|White Balance
The white balance fine-tuning screen _l_Adjust
appears when measuring is completed. /"_-_
Adjust the white balance as necessary.
(p.186) _
__+o_
Press the
OK
button.
The camera returns to the [White Balance] screen.
Press the
OK
button.
The camera is ready to take a picture.
• No image is recorded when the shutter release button is pressed to adjust
the white balance.
• The message [The operation could not be completed correctly] appears
when measuring is unsuccessful. Press the OK button while displayed to
remeasure the white balance.
• If the picture is extremely overexposed or underexposed, the white balance
may not be adjusted. |n this case. adjust to the proper exposure before
adjusting the white balance.
• When the mode dial is set to _1_ (Movie), the white balance cannot be
measured. Adjust the white balance in any capture mode other than ,1_
before recording a movie.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iHHHHHHi
iHHHHHHi
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
You can fine-tune the white balance settings.
1 Perform the desired setting in Step 3 on p.183.
2 Press the four-way controller (•).
The fine-tuning screen appears.