Pentax K-X Operating Manual page 37

1 Capture Mode 13 EV Compensation
2 Flash Mode 14 Histogram
3 Drive Mode 15 AE lock
4 White Balance 16 Shutter speed
5 Custom Image 17 Aperture value
6 Multi-exposure/Digital Filter/ 18 EV bar
HDR Capture/Cross Processing 19 Sensitivity
7 Number of shots using Multi- 20 Remaining image storage
exposure capacity
8 Battery level 21 Main face detection frame (Face
9 Temperature warning Detection AF)
10 Change AF point 22 Face detection frame (Face
11 Contrast AF frame Detection AF)
12 Phase Difference AF frameiAF
point
* Indicator 12 (Phase Difference AF frame) is displayed in white during
Live View. When the subject is in focus, a green square frame is
displayed instead. It turns red when the subject is not in focus. It is not
displayed when the focus mode is set to MF.
* Indicators 21 and 22 are displayed when [Autofocus Mode] is set to __@;
and the camera detects person's face(s). (Up to 16 face recognition
frames are displayed on the monitor.)
3
#
Available operations
INFO button
Enlarges the image to 2, 4, 6 times (when the focus mode
is set to MF, enlarges the image to 2, 4, 6, 8, 10 times).
Use the four-way controller ( • • • 1_) to move the display
area, and press the _ (Green) button to return the display
area to the center. (Available only when [Green Button] is
assigned to the _ (Green) button in [Green Button] of the
[1_ Rec. Mode 4] menu (p.179).)
Position the subject on the monitor and press the shutter
release button halfway.
The autofocus system operates.
When the focus mode is set to MF, turn the focusing ring until the subject
is clearly visible on the focusing screen.
Press the shutter release button fully.
The picture istaken.