By using two external flashes (AF540FGZ
or AF360FGZ)
or using the
built-in flash with one or more external flashes,
you can shoot in P-TTL
flash mode without connecting
the flash units with a cord.
' Set the power switch 0fthe
externai
flash to WIRELESSI
• Two or more AF540FGZ/AF360FGZ
external
flashes are required to use
high-speed
flash sync in the wireless
mode. Thi s function cannot be used in
€ombination
with the bu tt4n flash.
, Set the wireless
mod e of the externa I flash not directly €onnected
to the
camera
to SLAVE.
HHHHHHHHHHHH
First, set the channel for the external
flash unit.
/
Set the channel for the external flash unit.
2
Remove the cover of the hot shoe and attach the external
flash.
3
Turn on the camera and the external flash, and press the
shutter release button halfway.
The built-in flash is set to the same channel as the external flash unit.
w
• When Set to
_. mod e, the Channel currentlY Set for the built_i n flash is
displayed
in the viewfinder
f0r 1O seconds,
• Be sure to set all the flashes to the same channel.
Refer to the manual of
AF54OFGZ or AE36OFGZ for details on how to set the channet on the
external flash.