NordicTrack INCLINE TRAINER X5 NTK1494.1 User Manual page 9

Tighten two3"Bolts (98)withtwoWashers ( 97)intothe
bottom oftheUpright B ase(96)andtheHandrails ( 67)
(onlyoneHandrail is shown), F irmly tighten theBolts,
Withthehelpofa second person, c arefully tipthe Upright
Base(96)so it isfiatonthefloor,Remove t hecardboard
fromunderneath t he Upright B ase,
97
97
96
8, Fold the Incline Trainer to the storage position (see HOW
TO FOLD THE iNCLiNE TRAINER FOR STORAGE on
page 28),
Slide the Right Wheel Bracket (59) into the slot in the
Right Rear Endcap (57), Align the hobs in the Bracket
with the hobs in the Frame (43), Attach the Bracket to the
Frame with two 1" Bolts (55),
Attach the Left Wheel Bracket (not shown) in the same
way,
55
43
9, Make sure that aH parts are properly tightened before you use the Incline Trainer. Keep the included
allen wrench in a secure place, The allen wrench is used to adjust the walking belt (see page 31), To protect
the floor or carpet from damage, place a mat under the incline Trainer.