Operation And Adjustment - NordicTrack INCLINE TRAINER X5 NTK1494.1 User Manual

Table of Contents

Advertisement

OPERATION AND ADJUSTMENT
THE PRE-LUBRmCATED WALKmNG BELT
The incline Trainer features a waUking beUtcoated with
high-performance
Uubrbant, IMPORTANT:
Never
appty silicone
spray or other substances
to the
walking
belt or the walking
platform.
Such sub-
stances wil! deteriorate
the walking
belt and cause
excessive
wear.
HOW TO PLUG mNTHE POWER CORD
of the equipment-grounding
conductor
can
result in an increased
risk of electric shock.
Check with a qualified
electrician
or service-
man if you are In doubt as to whether the
product
is properly
grounded,
Do not modify
the plug provided
with the product--if
it will
not fit the outlet, have a proper ouUet
installed
by a qualified
electrician.
The Incline Trainer, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home's power,
Voltage surges, spikes, and noise interference can
result from weather conditions or from other appliances
being turned on or off, To decrease the possibility
of
the lncJine Trainer being damaged,
aJways use a
surge suppressor
with the Incline Trainer (see
drawing
1 at the right}. To purchase
a surge sup-
pressor,
see your IocaJ NordicTrack
dealer or call
1-888-825-2588
and order part number 148148.
Use onJy a singJe-outlet
surge suppressor
that is
UL 1449 tisted as a transient
voltage surge sup-
pressor (TVSS). The surge suppressor
must have a
UL suppressed
voltage rating of 400 voJts or Jess
and a minimum
surge dissipation
of 450 joules. The
surge suppressor
must be ebctdcaHy
rated for !20
volts AC and 15 crops. There must be a monitoring
tight on the surge suppressor
to indicate whether
it
is functioning
property.
Failure to use a propedy
functioning
surge suppressor
coutd result in dam-
age to the controJ system of the Incline Trainer. If
the control
system is damaged,
the waJking beJt
may change speed, accelerate,
or stop unexpect-
edly, which may result in a fall and serious injury.
This product
must be grounded,
if it should maifunc°
tion or break down, grounding provides a path of bast
resistance for electric current to reduce the risk of elec°
tric shock, This product is equipped with a cord having
an equipment-grounding
conductor and a grounding
plug, Plug the power cord into a surge suppressor,
and pJug the surge suppressor
into an appropriate
outlet that is property
installed
and grounded
in
accordance
with aH Jocal codes and ordinances.
Important:
The Incline Trainer is not compatible
with GFCl-equipped
outJets.
This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illus-
trated in drawing 1 below, A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge suppressor to a 2-pole
receptacle as shown in drawing 2 if a properly
grounded outlet is not available,
i
-Grounded
Outlet Box
_._
--
_urge Suppressor
_<
--. Grounding Pin
Grounding Pin
_rounded Outlet
G
g Hug
2
_rounded Outlet Box
Adapter
Surge Suppressor
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician,
The green°colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover,
Whenever the adapter is used it must be held in place
by a metal screw, Some 2-poJe receptacle
outlet box
covers are not grounded.
Contact a qualified
elec-
trician to determine
if the outlet box cover is
grounded
before using an adapter.
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Incline trainer x5Ntk1494.1

Table of Contents