NordicTrack INCLINE TRAINER X5 NTK1494.1 User Manual page 18

Table of Contents

Advertisement

HOW T@ CREATE A CUSTOM PROGRAM
if desired, you can create your own custom workout
programs and store them in memory for future use. Up
to four different programs can be stored at the same
time.
Follow the steps below to create a custom program.
Insert the key into the console.
See HOW TO TURN ON THE POWER on page
13.
SeJect one of the custom programs.
To select a cus-
tom program,
press the Speed
Programs/
Custom button re-
/ °
o
_
o
oi
PULSE
,
CUSTObl
SPEED!
INCl
INE
_,
peatedUy.As each
custom program is
sebcted, the Custom indicator wHU Hghtand a profile
of the speed settings of the sebcted program wHU
scroll across the matrix. Note: if the custom pro-
gram has not yet been defined, only three
columns
of indicators
writ be tit in the matrix, if
more than three columns
of indicators
are lit,
see HOW TO USE A CUSTOM PROGRAM on
page 19.
Press the Start button or the Speed + button
and program
the desired
speed and incline
settings.
A moment after the button is pressed, the walking
belt will begin to move. Hold the handrails and
begin walking.
See the matrix.
Each custom pro-
gram is divided
into one-minute
segments. One
speed setting and
one incline set-
ting can be pro-
grammed for
Current Segment
I
°
°
_
°I
IINaUNE PULSE _,,
CUSTOM SPEED I
each segment. The speed setting for the first seg-
ment will be shown in the flashing Current
Segment column of the matrix, (The incline set-
tings wiii not be shown in the matrix,) To program
a speed setting and an incline setting for the first
segment, simply adjust the speed and incline of
the Incline Trainer as desired by pressing the
Speed and Incline buttons, Every few times a
Speed button is pressed, an additional indicator
will light or darken in the Current Segment column,
During the last three seconds of the first segment,
both the Current Segment column and the column
to the right will flash, a series of tones will sound,
and the Speed/Pace display and the Incline/
Elevation display will flash, When the first segment
ends, the current speed setting and the current in-
cline setting will be saved in memory, and aft
speed settings in the matrix will move one column
to the left. The speed setting for the second seg-
ment will then be shown in the flashing Current
Segment column. Program a speed setting and an
incline setting for the second segment as de-
scribed above.
Continue programming speed and incline settings
for as many segments as desired; custom pro-
grams can have up to forty segments, When you
are finished with your workout, press the Stop but-
ton twice, The speed and incline settings that you
have programmed and the number of segments
that you have programmed wiii then be saved in
memory,
Fottow your progress
with the displays.
See step 5 on page 14.
Measure your heart rate if desired.
See step 6 on page 15.
Turn on the fans if desired.
See step 7 on page 15.
Use the upper body bandies
if desired.
See step 8 on page 15.
When you are finished
exercising,
remove the
key.
See step 8 on page 17.
18

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Incline trainer x5Ntk1494.1

Table of Contents