Advertisement
HOW TO CHANGE CONSOLE SETTINGS
3.
Select a unit of measurement
if desired.
The console features a user mode that allows you to
select a unit of measurement and a backlight option
for the console and to view console usage information.
1.
Select the user mode.
To select the user mode, press and hold down the
Priority Display button for a few seconds until the
user mode information appears in the display.
2
Select a backlight option if desired.
The console has
three backlight
options. The ON
_J_"'_"_
option keeps the
backlight on while
the console is on.
E
To conserve the
batteries, the AUTO
option keeps the
backlight on only
while you are pedaling. The OFF option turns the
backlight off.
The upper display will show the currently selected
backlight option. Press the Silent Magnetic
Resistance increase button repeatedly to select
the desired backlight option.
The console can show pedaling pace and distance
in either miles or kilometers.
The lower right display will show the selected unit
of measurement. An E for English miles or an M
for metric kilometers will appear in the lower right
display. To change the unit of measurement,
press
the Silent Magnetic Resistance decrease button
repeatedly.
Note: When you replace the batteries, it may be
necessary to reselect the unit of measurement.
4.
View console usage information if desired.
The lower left display will show the total number of
hours that the console has been used since the
exercise cycle was purchased.
5.
Exit the user mode.
Press the Priority Display button to save the con-
sole settings and exit the user mode.
19
Advertisement
