Table of Contents
Advertisement
Galaxy cooktop/hob
22
1
3
2
Before using the cooktop/hob
Before using your Galaxy cooktop clean it with
warm soapy water and a soft cloth to remove
dust. Check that the electricity is switched on
in order for the electronic ignition to work.
Choose the cooktop control knob for the
burner you want to use. Press down and turn
the knob anti clockwise all the way to the
HI symbol. Hold down the knob for 5 seconds
until the burner lights. All the igniters will
spark until the gas ignites on the selected
burner. The flame can be adjusted anywhere
between the
HI symbol and the
Do not regulate the flame between high and the
If the cooktop/hob does not light
Check that the power is switched on allowing the electronic ignition to work.
Check that the burner rings are placed correctly.
Clean electrode tips with a toothbrush and methylated spirits.
The wok burner may need a moment to stabilise the inner ring of flame.
Check that you know how the flame failure device works (see below).
Check the gas supply is turned on.
4
5
5
LO symbol.
OFF position.
Griddle burner
1
Auxilliary burner
2
Wok burner
3
Electric barbeque
4
Semi-rapid burners
5
Fig. 10 Galaxy cooktop/hob
Hide quick links:
Advertisement
Table of Contents
