Using Your Gas Cooktop - Fisher & Paykel OR90SCG2 User Manual

OR90 models – cooktop
Burner Controls
The dials control the flow of gas through the valve.
Using the single burners
1 Identify the dial of the burner
you want to use.
2 Starting from the O (OFF) position,
push the dial in and turn it
anticlockwise to HI.
The ignitor on the burner will spark.
3 After the burner has lit keep the
dial held in for a few more seconds
before releasing.
Releasing the dial too soon will
extinguish the flame.

USING YOUR GAS COOKTOP

1 2
3
1 Semi-rapid burner
2 Dual wok burner
3 Triple-ring wok burner
1
3
4 When the burner has lit, adjust the
flame anywhere between HI and LO.
Do not adjust the dial between
HI and O (OFF).
41