Oven Displays - Fisher & Paykel Multifunction oven User Manual

Oven displays

Oven mode dial & display
Turn clockwise to select your desired oven
mode. When the mode is set, the lights and
cooling fan will come on.
Temperature dial & display
Turn clockwise to select the oven temperature
you want to cook at. The default setting for the
temperature display is degrees Fahreheit. Refer
to the 'USER SELECT options' for instructions on
how to change the temperature display settings.
Note: for double oven models, controls on the left are for the upper cavity and controls on the
right are for the lower cavity.
Preheating your oven
Preheat your oven when using the following modes: TRUEAERO, AEROBAKE, BAKE,
AEROPASTRY and PASTRY BAKE. Preheating your oven is not required when using ROAST and
AEROBROIL.
Position shelves in the oven before preheating.
When your oven is preheating, your selected cooking temperature is displayed alternately
with the actual oven temperature. When the oven has reached the selected temperature
an audible beep will sound and the temperature display will change from orange to green
(brushed stainless steel models) or orange to blue (Iridium stainless steel models).
The AeroTech® oven is equipped with a fast preheat function. In TRUEAERO, AEROBAKE, BAKE,
AEROPASTRY and PASTRY BAKE modes it will heat to 345 º F (175 º C) from cold in under 10
minutes and to 425 º F (220 º C )in under 15 minutes.
Note: if you want to change the oven mode and/or temperature during operation, turn the
oven mode and temperature dials to OFF then wait for the temperature and mode lights to
turn off before selecting your new settings. This will reactivate the fast preheat function.
8