Setting The Clock - Fisher & Paykel Multifunction oven User Manual

Setting the clock

As your oven is connected to a power supply for the first time, a tone will sound and the clock
display will light up. The clock display will show '0:00' and the colon ( : ) will flash. Next, set the
clock.
Clock must be set before oven can be operated
To set the clock
The oven clock has a default 24 hour display. '0:00' will be shown when the oven has been
turned on at the wall and the colon will flash.
While the colon is flashing, rotate the setting selector until the correct time of day is showing.
1
Press the
2
will be automatically adopted.
Refer to the 'USER SELECT options' for instructions on how to change the clock to display 12
hour time.
a
button to adopt the time you have set or wait eight seconds and the setting
b c
Clock display
a
button
b
C L O C K
- allows you to set the clock.
c
PUSH TO
CLEAR
- turn this button to set the: clock/timer/
probe temperature/cook time/stop time.
Press this button to clear the display.
7