Mts Broadcast Stereo System - Magnavox VRU662AT Owner's Manual

Philips
Hide thumbs Also See for VRU662AT:
Table of Contents

Advertisement

39
MTS
Broadcast
Stereo
System
Your VCR call play recordings broadcast in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound from two sources.
Your VCR also can play tapes recorded in a second audio (usually, that means your program is recorded in a second language).
Of course, your VCR will play tapes recorded in monaural (single-source) sound as well.
Your VCR also will record in Hi-Fi stereo or in second audio, so when you play back that tape on the VCR, it will be in stereo
or second audio.
If you play back the tape on a VCR that can't play back tapes in stereo m" second'audio,
the VCR will automat-
ically play the tape in monaural
sound.
Read the directions on this page to familiarize yourself with. your VCR's stereo and second audio setups. Then follow the. direc.
tions on page 40 to record in stereo or second audio and the directions on page 41 to playback tapes recorded in Hi-Fi stereo.
Understanding On-Screen Displays
When you receive a signal from a channel you're watching, portions of the display screen shown below will appear when you
press the STATUS/EXIT button on the remote control.
The indication
2ND A UD or TV STEREO
]
that appears
on this side of the status display
tells you if your VCR is programmed
to
receive a second audio or stereo broadcast
(it cannot
be programmed
to receive both at
the same time).
/_SSTOP
12:00AM"_
TVSTEREO
CH 02
STEREO
2NDAUD
SLP
1:23:45
HIFI
--The
indication
2ND AUD or STEREO
that
appears
on this side of the status display
tells
you if the program
you're
watching
is avail-
able in second
audio or stereo.
This indication
is not available
during tape
playback.
Specifically...
/STOP
12:00AM-"_
TVSTEREO
CH 02
STEREO /
2NDAUD /
SLP
1:23:45
HIFI
When a program
broadcast
in stereo is available,
STEREO
appears
here.
When a program
broadcast
in second audio is available,
2ND AUD appears
here.
-When
a program is available both in stereo and second audio, both STEREO and 2ND AUD
- appear here.
NOTE: Although a program may be broadcast in both stereo and second audio, you cannot
record in both stereo and second audio at the same time.

Advertisement

Table of Contents
loading

Table of Contents