Table of Contents
Advertisement
28
MTS Broadcast
Stereo System
• *,*
o°,°°°°°°
,*****,*oJlt
o°°°°°°
*_**e***o,,
°o
* °°°°°°°°
_***l,i
°°°°°
**o_*_eeooo*
°°°°o
*oo_*oo,lo
o°
*_ttoee_***
° *eeeo**_to66
o Jmeeeeeee
Your VCR can play recordings
broadcast
in Hi-Fi (high fidelity)
stereo, which produces
a crisp, clear sound from two sources.
Your VCR also can play tapes recorded
in a second audio (usually,
that means your program
is recorded
in a second language).
Of course,
your VCR will play tapes recorded
in monaural
(single-source)
sound as well.
Your VCR also will record
in Hi-Fi stereo or in second audio, so when you play back that tape on the VCR, it will be in stereo
or second
audio.
If you play back the tape on a VCR that can't play back tapes in stereo or second
audio, the VCR will automat-
ically play the tape in monaural
sound.
Read the directions on this page to familiarize yourself with your VCR's stereo and second audio setups. Then follow the direc-
tions on page 29 to record in stereo or second audio and the directions on page 30 to record in Hi-Fi stereo.
Understanding
On-Screen
Displays
When you receive a signal from a channel you're watching, one of the display screens shown below will appear when you press
the STATUS/EXIT button on the remote control.
The indication
2ND A UD or TV STEREO
]
that appears
on this side qf the status display
J
tells you if your VCR is programmed
to
receive a second attdio or stereo broadcast
(it cannot be ptr_grammed
to receive
both at
the same time).
_TOP
12:00AM _
TVSTEREO
CH 02
STEREO
2NDAUD
SLP
1:23:45
HIFI
--The indication
2ND A UD or STEREO
that
appears
on this side of the status display
tells
you ij the program
you're
watching
can be
received
in second attdio or stereo.
_ This indication
is not available
during tape
playback.
Specifically.,.
/_OP
12:00AM_
TV STEREO
CH 02 ,
[__
STEREO/
2NDAUD /
_LP
1:23:45
HIFI
/When a program broadcast in stereo can be received, STEREO appears here.
/When a program broadcast in second audio can be received, 2ND AUD appears here.
-When
a program
broadcast
both in stereo and second audio can be received,
both STEREO
and
-2ND
AUD appear
here.
'NOTE: Although
a program
may be broadcast
in both stereo and second audio, you cammt
record in both stereo and second
audio at the same time.
Receiving and Recording
in Stereo or Second Audio
Receiving and Recording in Stereo
/STOP
TV STEREO
_SLP
12:00 AM"_
[- To receive and record in stereo,
press the MENU
button on your remote
control.
Then press the
CH 02
I 1 Number
3 button
to select TUNER
SET UR Now, press the Number
6 button to select TV
STEREO
I 1 STEREO.
Press the STATUS/EXIT
button to exit.
When you press the STATUS/EXIT
button on
/
your remote
control. TV STEREO
will appear
in the upper left corner of the TV screen.
1:23:45
HIFI_
Receiving and Recording in Second Audio
_SSTOP
12:00AM _"
2NDAUD
CH02
2NDAUD
_LP
1:23:45
HIFI
I
o receive
and record
in second
audio, press the MENU
button on your remote control.
The]]
press the Number
3 button to select TUNER
SET UP. Now, press the Number
7 button to select
2ND AUDIO.
Press the STATUS!EXIT
button to exit.
When you press the STATUS!EXIT
but-
ton on your remote control,
2ND AUD will appear
in the upper left corner of the TV screen.
Advertisement
Table of Contents
