Magnavox VRU662AT Owner's Manual page 33

Philips
Hide thumbs Also See for VRU662AT:
Table of Contents

Advertisement

33
Playback
Options (cont'd)
i
VCR
1
Play, fast forward, or
rewind a tape to the loca-
tion that you would like to
refer to later. Press the
STOP button or the
STOP/EJECT
5
When in Stop mode,
press the REW(ind)
button or the EFWD
button to go to a tape
location where the
time counter was reset
to zero.
Press the
STATUS/EXIT
button
to bring up the status
display.
Remote Control
button to stop
the tape.
(566
Press the CLEAR but-
ton to reset the time
counter to zero.
4
Press the MEMORY
button to set the time
counter memory.
• The MEMORYbutton does not function during Repeat Playback.
• The VCR must be in Normal Play mode before you can set the 7_me Counter
Memory. See Notes on page 31 for details on cancelling Repeat Play mode and
putting the VCR in Normal Play mode.
• To erase a lime Counter Memory, press the MEMORY button repeatedly until
the M disappears from the screen and the display panel.
• You may only set the time counter to zero at one location at a time. If you try to
set the time counter to zero at a second location, the previous time counter to
zero setting will be erased
• When a lime Counter Memory has been set, the Memory Light "M" will
appear on the display panel.
Time Counter Memory
Follow the steps below to reset the time
counter to zero at a tape location you want
to refer to later.
1
Play, fast forward, or rewind a tape to the
location that you would like to refer to later.
Press the STOP button or the STOP/EJECT
button to stop the tape.
2
Press the STATUS/EXIT button. The status
display will appear on-screen for about five
seconds.
While the status display is still on-screen,
press the CLEAR button to reset the time
counter to zero.
4
While the time counter is still on-screen,
press the MEMORY button to set the time
counter memory. M will appear to the left
of the time counter on-screen.
P
M 0:00:00
HIFI j
5
To go to a tape location where the time
counter was reset to zero, press the
REW(ind) button or the EFWD button when
in Stop mode. When the tape reaches the
point at which the time counter was reset to
zero, the tape will stop. Press the PLAY but-
ton to watch the tape.

Advertisement

Table of Contents
loading

Table of Contents