Table of Contents
Advertisement
9
Recording
°°o_°__°°_*°°'°t°°'__o_*o*°___°°_°°__oO0*°°°__°°__O°*_°_°°°°°°°__o°°°°°____o*_°°___°°__*o°_____*o°o_°°__oooooIo*jt_o_ooo_o__o_o_o_O
TV and VCR
Turn the TV on and set
it tochannel
3 or 4.
J
i.....a
2
In_t
a tape.
m To stop recording,
j :Sn he o
pause
recording.
To
start recording
again,
press
the
PAUSE/STILL
button
again
or press
the
REC(ord)/OTR
but-.
ton.
4
Press the (Tape)
SPEED
button
to
select
the tape speed.
000
Use the CH(annel)
Up/Down
buttons
or
the Number
buttons
to select
the channel
you want to record.
Press
the
REC(ord)/OTR
button
once to start recording.
Remote Control
• lfthe REC(ord)/OTR
button is l)ressed while a nqw without a record tab is in the
VCR, PROTECTED
CASSETTE CANNOT RECORD
will flash on-screen, and the
VCR will eject the tape.
• Recording options are on pages 19 - 2Z
• You can change the tape speed while the VCR is recording, but some distortion will
appear on the tape.
• The VCR will record in a preset volume.
• The REC(ord)/OTR
button on the remote control will not start an immediate
recording if the TV GUIDE Plus+ menu is on-screen.
• When you press the GUIDE PLUS+ button to access the TV GUIDE Plus+ system
while the VCR is recording a program, CAUTION: ACTIVATING
TV GUIDE
PLUS WILL STOP RECORDING
will appear on-screen for I0 seconds.
If you
want to continue recording, press the STATUS/EXIT
button to exit. If you press the
GUIDE PLUS+ button again while the message is on-screen, the VCR will stop
recording and will access the TV GUIDE Plus+ system.
If you do not press any buttons within I0 seconds, the message will disappear and
the VCR will continue recording.
Read and follow the steps below to record
a television
program.
Turn the TV on and set it to channel
3 or
4, whichever
the CH3/CH4
switch on the
back of the VCR is set to.
2
Insert a tape with its record tab intact
(see page five) in the VCR.
The power
will come on, andthe
Cassette-Inside
light will appear.
3
If the VCR light on the display
panel of
the VCR appears,
go to step 4. If the
VCR light does not appear,
press the
VCR button,
then press the VCR/TV
but-
ton once.
Press the (Tape) SPEED
button on the
remote
control until the desired
tape speed
(see page five) appears
on the display
panel and on the TV screen.
The tape
speed will disappear
from the screen after
about five seconds.
:
Use the CH(annel)
Up/Down
buttons
or
:
the Number
buttons
to select the channel
:
to be recorded.
• Press the REC(ord)/OTR
button once to
: start recording.
i7
To pause the recording
(for example,
during
: commercials),
press the PAUSE/ST1LL
but-
:
ton or the PAUSE button once. To start
: recording
again, press the REC(ord)/OTR
: button or the PAUSE/STILL
button
or the
i
PAUSE button
again.
: To stop recording,
press the STOP button.
Advertisement
Table of Contents
