Replacing the oven lamp
1 Turn the power to the cooker off at the wall.
2 Let the oven cavity and the heating elements cool down.
3 Remove the protective cover "B".
4 Unscrew and replace the bulb "A" with a new one suitable for high temperatures (300
with the following specifications: 230-240V, 50Hz, E14 and same wattage as the bulb being
replaced (check wattage stamped on the bulb).
5 Refit the protective cover "B".
Note: oven bulb replacement is not covered by your warranty.
Storage drawer
The drawer comes out like a normal drawer.
A safety notch stops it from sliding out.
The handle is concealed at the bottom of
the front panel.
To remove the drawer, proceed as per Fig. 88.
To replace the drawer, repeat the steps in
reverse order.
Fig.86 Removing the oven lamp
Handle
Fig.87 Drawer
Care and cleaning
B
A
Fig.88 Removing the drawer
79
o
C)
1
4