Fisher & Paykel OR60 Installation Instructions And User Manual page 58

Care and cleaning
56
Replacing the oven lamp
1 Turn the power to the cooker off at the wall.
2 Let the oven cavity and the heating elements cool down.
3 Remove the protective cover "C".
4 Unscrew and replace the bulb "A" with a new one suitable for high temperatures (300
with the following specifications: 230-240V, 50Hz, E14 and same wattage as the bulb being
replaced (check wattage stamped on the bulb).
5 Refit the protective cover "C".
Note: oven bulb replacement is not covered by your warranty.
C
B
Fig.63 Removing the oven lamp
o
C)