GE Quickset III Owner's Manual page 7

Using the surface units. Ion
some models) GEAppliances.com
IZ WARNING
I IRE HAZARD: Never leave the range unattended with the cooktop on medium or high settings. Keep flammable items away from the cooktop. Turn off all
controls when done cooking. Failure to follow these instructions can result in
fire, serious injury or death.
Throughout this manual, features and appearance may vary from your model.
At both OFF and HI the
control clicks into position.
You may hear slight clicking
sounds during cooking,
_ndlcatlngthe control ts
maintaining your desired
setting.
Be sure you turn the control
knob to OFFwhen you finish
cooking.
How to Set
Pushthe knob in and turn in either
direction to the setting you want.
For glass cooktop surfaces:
A HOT COOKTOP indicator light will glow
when any radiant element is turned on,
and will remain on until the surface is
cooled to approximately 150°R
Indicator light will:
come on when the unit is turned on or
hot to the touch.
stay on even after the unit is turned off.
glow until the unit is cooled to
approximately 150°F.
For coil cooktop surfaces:
A surface unit ON indicator light will glow
when any surface unit is on.
OFF
REAR
The WM (worm) setting (on some models)
on the right REAR surface unit keeps
already heated food warm until ready to
serve.
i Z ¸
SMALL LARGE
BURNER _ BURNER
OFF
;,P.,,,.-Jrl _._
On some models.
SMALL LARGE
BUFINER OFF BURNER
H| • _ @HI
°
6
LO 2
On some models.
Dual and Triple Surface
Units
and Control Knobs (on
some models)
The surface unit has 2 or :3cooking sizes
to select from so you can match the size
of the unit to the size of the cookware you
are using.
Models with o Td-Ring surface
element only.