GE Quickset III Owner's Manual page 11

Using the oven control clock
and timer features and settings.
Throughout this manual, features and appearance may vary from your model
GEAppliances.com
Temp Recall
On/Off
Bake/Tamp Recoil Pad
Touch this pod to select the bake function.
Bake Light
Flasheswhile in edit mode-you can change the oven
temperature at this point. Glowswhen the oven is in
bake mode.
Start/On Pad
Must be touched to start any cooking or cleaning
function.
Display
Shows the time of day, oven temperature
and the times set for the timer or automatic
oven operations. The display will show PrE while
preheating. When the oven reaches the selected
temperature, the oven control will beep and the
display will show the oven temperature.
If "F-" and o number or letter flash in the display
and the oven control signals,this indicates o
function error code.
If your oven was set for o timed oven operation
and o power outage occurred, the clock and oil
programmed functions must be reset.
The time of day will flash in the display when there
has been o power outage. Resetthe clock.
If the function error code appears during the self-
cleaning cycle, check the oven door latch. The latch
handle may have been moved, even if only slightly,
from the latched position. Hake sure the latch is
moved to the right as for as it will go.
Touch the Clear/Offpad. Allow the oven to cool
for one hour. Put the oven back into operation. If the
function error code repeats, disconnect the power
to the range and coil for service.
Kitchen Timer On/Off
or Timer On/Off Pad
Touch this pod to select the timer feature.
Then press + and - pads to adjust time.
Timer Light
Flasheswhile in edit mode-you can change the set
time at this point. Glows when the timer has been
activated. Flashesagain when the time has run out
until the control is reset.
Clock Pad
To set the clock, press this pod twice and then
press the + and - pods. The time of day will flash in
the display when the oven is first
turned on.
o Start Time Pad
_Sturt-']
_ime_ Use along with the Cooking Time
or Self Clean pads to set the oven
to start and stop automatically
at o time you set.
Start Time Light
Flasheswhile in edit mode-you can changethe start
time at this point. Glowswhen the function has been
activated.
• Cooking Time Pad
_ooki_ Touch this pod and then touch the
_._Time _ + or- pads to setthe amount of
time you wont your food to cook.
The oven will shut off when the
cooking time has run out.
Cooking Time Light
Flasheswhile in edit mode-you can changethe set
time at this point. Glowswhen the function has been
activated. Flashesagain when the time has run out
until the control is reset.
• ® Automatic Oven Light
oki torQ
_ Time.[.._Time _ This lights onytime
- the oven has been
® Automatic O ven programmed using the
Cooking Time or Start
Time functions.
('-oven-'_ oven Light On/Off Pad
[,. LightJ Touch this pod to turn the oven light
antOff
on or off.
- Pad
Short tops to this pod will decrease
the time or temperature by small
amounts. Touch and hold the
pod to decrease the time or
temperature by larger amounts.
+ Pad
Short tops to this pod will increase
the time or temperature by small
amounts. Touch and hold the pod
to increase the time or temperature
by larger amounts.
11