GE P2B930 Owner's Manual And Installation Instructions page 56

Before you call for service...
Troubleshooting Tips
Possible Causes
The convection fan may turn on
and off automatically.
Fan noise
Convection fan Preheat temperature . Fanwill start automatically once the preheat
not working not reached, temperature is reached.
Drawer does not slide The drawer is out of alignment. • Fullyextend the drawer and push it all the way in.
smoothly or drags See the Care and cleaning of the range section.
Drawer is overloaded or load * Reduceweight. Redistribute drawer contents.
is unbalanced.
Lower oven drawer or A fuse in your home may be • Replacethe fuse or reset the circuit breaker.
warming drawer will blown or the circuit breaker
not work tripped.
The upper oven is self-cleaning. • Wait for the self-clean cycle to finish and the oven
to cool.
Controls improperly set. * See the Lower oven drawer section.
Excessivecondensation Liquid in drawer. • Removeliquid.
in the drawer
Uncovered foods. • Cover food with lid or aluminum foil.
Temperature setting too high. * Reducetemperature setting.
Food dries out in the Moisture escaping. * Cover food with lid or aluminum foil.
lower oven drawer or
Oven drawer not fully closed. * Pushdrawer in until latch engages.
warming drawer
What To Do
, This is normal. The convection fan will run until the
function is over or the door is opened.
56