Anti-Tip Device; Instructions - GE P2B930 Owner's Manual And Installation Instructions

Installation Instructions
ANTI-TIP
e
e
INSTALLING THE ANTI-TIP DEVICE
AWARNING
DEVICE
All ranges can tip.
BURNSor other SERIOUSINJURIES
can
result.
,
INSTALLand CHECKthe
anti-tip bracket following the
instructions
supplied
with the bracket.
To reduce the risk of tipping the range, the range must
be secured by a properly installed anti-tip bracket. Follow
the instructions packaged with the bracket.
To check if the bracket is installed and engaged
properly, look underneath the range to see that the
rear leveling leg is engaged in the bracket. On some
models, the storage drawer or kick panel can be
removed for easy inspection. If visual inspection is not
possible, slide the range forward, confirm the anti-tip
bracket is securely attached to the floor or wall, and
slide the range back so the rear leveling leg is under
the anti-tip bracket.
If the range is pulled from the wall for any reason, always
repeat this procedure to verify the range is properly
secured by the anti-tip bracket.
If your range has no anti-tip bracket, call 1.800.626.8774
to receive one at no cost.
WHEN ALL HOOKUPS ARE COMPLETED
Make sure all controls are left in the off position.
Make sure the flow of combustion and ventilation air
to the range is unobstructed.
52