GE P2B930 Owner's Manual And Installation Instructions page 40

Installation Instructions
DIMENSIONS AND CLEARANCES
Provide adequate clearances between the range and adjacent combustible surfaces. These dimensions must be
met for safe use of your range. The location of the electrical outlet and pipe opening (see Gas Pipe and Electric
Outlet Locations) may be adjusted to meet specific requirements.
The range may be placed with 0" clearance (flush) at the back wall. (Some models will not fit flush.)
*Models PGB900,
PGB910, PGB915,
PGB930 and PGB935
require only 3"
minimum clearance
to left wall.
18"-
Minimum to
cabinets on
either side
of the range
Minimum
clearance ---
to leftwall*
[ 1
30"
30"
Minimum -_-- 6" Minimum
J
clearance to
right wall
Maximum
depth for
cabinets above
countertops
To cabinets
below
cooktop and---_.'l _-- 0"
at the range
back
3 6"
i14"--_
m
' r
Front edge of
the range side
panel forward
from cabinet
To cabinets below
cooktop and at
the range back.
(Somemodels
will not have 0"
clearance)
Depth with door closed (includesdoor handle)
Depth varies depending on model.
Seespecifications sheet for your model.
4O