Makita 2708 Instruction Manual page 25

CAUTION :
.Only the Makita dado head set (Part No. 191543-4) should be used with Makita table
.After dadoing, always replace the blade guard with the spreader back in
i t s
original posi-
0
Never attempt bevel cuts when dadoing.
0
Never dado if there is vibration (flutter) or a strange noise.
0
Never attempt dados in other than wood.
0
When using a dado head
set,
the depth of cut is not indicated by the pointer. (See the
cutting depth adjustment section.) To know the depth of cut, you must measure
it
with
a ruler.
0
Do not use the dado
s e t
for cut-offs.
Feed work slowly, especially when cutting deep or wide grooves or dados. Fast or
abrupt feeds can be dangerous.
*Use
a
pushstick. When the dado head i s hidden from view while cutting, your hands
should never be on top of the stock.
* A very dangerous throwback can result if the wood becomes stuck and you try to
remove it by pulling toward you. Always stop the tool and wait for dado head to come
to a complete stop. Then simply withdraw the wood.
saw Model
2708.
tion on the table saw.
25