Makita 2708 Instruction Manual page 24

NOTE :
When widths slightly greater than the above are required, fit the paper washers in between
the inside and outside cutters to adjust the width.
@Arrange the cutters
so
that the tips of
the inside cutters are positioned a t the
gullets of the outside cutter.
When more than one inside cutter is
used, space the tips of the inside cutters
equidistantly in relation to one another.
Poorly spaced cutters may cause vibra-
tion and noise.
When ins slling twooutside cutters with-
out any inside cutter, be sure that the
cutter tips do not face each other.
@While tightening the hex nut, be careful to maintain the even spacing between the tips
0
Rotate the dado head one turn by hand to make sure that
it
does not contact anything
of the inside cutters.
before operation.
24