Makita 2708 Instruction Manual page 22

1/8"
1/16" 1/8" 1
/ a
Dado head
set
(Part
No.
191543-4)
A dado is cutting a rabbet or a wide groove
into the workpiece. The dado head set con-
sists of two outside cutters, three inside
cutters and paper washers.
Outside cutters : 6" diameter, 118" thick, 518" arbor hole, 2 pcs.
Inside cutters :
6" diameter, 118" thick,
5/8" arbor hole, 2 pcs.
Inside cutter
Paper washers : 518" arbor hole, 6 pcs.
: 6" diameter, 1/16" thick, 5/8" arbor hole, 1 pc.
Various combinations of these cutters are used to cut grooves from 118" to 1/2" for use
in making joints, tenoning, grooving, etc.
Dado outer flange
(Part No. 224263-6)
When cutting groove 5/16", 3/8". 7/16" or
1/2", use this dado outer flange.
Table insert
(Part No. 342787-1)
When cutting grooves 1/4", 5/16", 318".
7/16", 112" use this table insert instead of
the standard table insert.
22