Basic Specifications - SATO CG2 Series Quick Manual

BASIC SPECIFICATIONS

Model name
Head density 203 dpi (8 dots/
(resolution) mm)
Printing method Direct Thermal
Printing area 2.2" wide x 23.6" pitch
(56 mm wide x 600 mm pitch)
Label issuing Standard: Continuous mode, Tear off mode, Sensor off mode
mode Optional: Dispenser mode, Cutter mode
Printing speed 2, 3 or 4 inches/second (Setting: 2, 3, 4)
50, 75 or 100 mm/second (Setting: 50, 75, 100)
Unprintable area Label:
Length direction Upper: 0.1" (1.5 mm) or less Lower: 0.1" (1.5 mm) or less
(Not including backing paper)
Width direction Left: 0.1" (1.5 mm) or less Right: 0.1" (1.5 mm) or less
(Not including backing paper)
Tag:
Length direction Upper: 0.03" (0.8 mm) or less Lower: 0.03" (0.8 mm) or less
Width direction Left: 0.03" (0.8 mm) or less Right: 0.03" (0.8 mm) or less
Paper type Roll paper, fan-folded paper
Paper shape Only use paper manufactured or specified by SATO.
Paper thickness 60 to 190μm, 0.00" to 0.01" (0.06 to 0.19 mm)
Label size See Label size table later in this unit.
CG2 Series Quick Guide
CG208 DT CG212 TT
305 dpi (12 dots/
mm)
Section 9: Basic Specifications
CG208 TT
203 dpi (8 dots/ 305 dpi (12 dots/
mm)
Thermal Transfer (Direct Thermal/
Thermal Transfer)
2.2" wide x 15.7" pitch
(56 mm wide x 400 mm pitch)
CG212 TT
mm)
Page 9-1