SATO CG2 Series Quick Manual page 46

Section 9: Basic Specifications
Model name
Outer diameter of Label:
paper or Roll size Maximum ø 5.12" (130 mm)
Inner diameter of roll: ø1.5" (ø40 mm)
Wrist bands:
Maximum ø4.33" (110 mm)
Inner diameter of roll: ø1.5" (ø40 mm)
Tag:
Maximum ø9.84" (250 mm)
Inner diameter of roll: ø3" (ø76 mm)
Use an external supply unit when setting a tag.
Ribbon size -
Ribbon type
Ribbon winding
direction
Standard installed fonts
Bit map font ANK font
XU, XS, XM, XB, XL, OCR-A, OCR-B
OCR-A (15×22)
OCR-B (20×24)
Kanji font Supported by downloading one of the following kanji fonts.:
1 Japanese (16x16, 22x22, 24x24, Kaku Gothic (JIS Std 1, 2, JIS X208))
2 Chinese (24x24 GB2312)
3 Korean (24x24 KS X1001)
Rasterized font CG Times, CG Triumvirate
Barcode UPC-A/UPC-E, JAN/EAN, CODE39, CODE93, CODE128, GS1-128
(UCC/EAN-128), CODABAR (NW-7), ITF, Industrial 2 of 5, Matrix 2 of 5,
BOOKLAND, MSI, POSTNET, GS1 DataBar (RSS)
2D barcode QR Code, Micro QR, PDF417, Micro PDF, MAXI Code,
GS1 DataMatrix (ECC200)
Composite sym- JAN/EAN, UPC-A/UPC-E, GS1-128, GS1 DataBar (RSS)
bol
Printing direction Characters: 0, 90°, 180°, 270°
(Characters/ Barcode: Parallel 1 (0°), Parallel 2 (180°), Serial 1 (90°), Serial 2 (270°)
Barcode)
Barcode ratio 1:2, 1:3, 2:5, Free specification
Magnification Characters: Vertical ×1 to ×12, horizontal ×1 to ×12
ratio Barcode: ×1 to ×12
(Characters/
Barcode)
Page 9-2
CG208 DT CG212 TT
OCR-A (22×33)
OCR-B (30×36)
CG208 TT
Ribbon length: 50 m
Ribbon width: 59 mm
Winding direction: Face out
Ribbon winding method: Roll-wound
ribbon
OCR-A (15×22) OCR-A (22×33)
OCR-B (20×24) OCR-B (30×36)
CG2 Series Quick Guide
CG212 TT