Basic Specifications - SATO TH208 Quick Manual

Basic Specifications

Model name
Printing method
Head density
(Resolution)
Printing effective area
Unprintable area
Printing speed
Paper type/Paper shape
Paper thickness
Label size
Outer diameter of paper roll /
Internal diameter of roll core
*Some restrictions may apply to the paper sizes that can be used depending on the type of
paper, usage environment, and application.
18
TH208
Direct thermal
203dpi (8-dot/mm)
156mm pitch x 56mm wide (6.1" pitch x 2.2" wide)
Length direction Upper: 2.0mm (0.07") Lower: 2.0mm (0.07")
(Not including backing paper)
Width direction Left: 1.5mm (0.05") Right: 1.5mm (0.05")
(Not including backing paper)
50 to 100mm/sec (2 to 4 inches/sec)
* Printing speed differs depending on paper type and usage environment.
Roll paper (Winding face-in/face-out)
Recommended use of paper manufactured or specified by SATO.
140 to 190µm (0.14 to 0.19mm/0.005 to 0.007")
Continuous type
[Die cut label] Pitch: 16 to 156mm/0.6 to 6.1" (Backing paper 19 to 159mm/0.7 to 6.2")
Width: 25 to 60mm/0.9 to 2.3" (Backing paper 28 to 63mm/1.1 to 2.4")
[Butt-cut label] Pitch: 16 to 156mm/0.6 to 6.1" (Backing paper 16 to 156mm/0.6 to 6.1")
Width: 28 to 60mm/1.1 to 2.3" (Backing paper 28 to 60mm/1.1 to 2.3")
Cutter type
[Die cut label] Pitch: 16 to 156mm/0.6 to 6.1" (Backing paper 19 to 159mm/0.7 to 6.2")
Width: 25 to 60mm/0.9 to 2.3" (Backing paper 28 to 63mm/1.1 to 2.4")
Tear-off type
[Die cut label] Pitch: 16 to 156mm/0.6 to 6.1" (Backing paper 19 to 159mm/0.7 to 6.2")
Width: 25 to 60mm/0.9 to 2.3" (Backing paper 28 to 63mm/1.1 to 2.4")
[Butt-cut label] Pitch: 16 to 156mm/0.6 to 6.1" (Backing paper 16 to 156mm/0.6 to 6.1")
Width: 28 to 60mm/1.1 to 2.3" (Backing paper 28 to 60mm/1.1 to 2.3")
Dispenser type
[Die cut label] Pitch: 16 to 117mm/0.6 to 4.6" (Backing paper 16 to 120mm/0.6 to 4.7")
Width: 25 to 60mm/0.9 to 2.3" (Backing paper 28 to 63mm/1.1 to 2.4")
[Butt-cut label] Pitch: 16 to 117mm/0.6 to 4.6" (Backing paper 16 to 117mm/0.6 to 4.6")
Width: 28 to 60mm/1.1 to 2.3" (Backing paper 28 to 60mm/1.1 to 2.3")
Linerless type (without cutter)
Pitch: 25.4 to 100mm/1 to 3.9"
Width: 28 to 60mm/1.1 to 2.3"
Linerless type (with cutter)
Pitch: 45 to 100mm/1.7 to 3.9"
Width: 28 to 60mm/1.1 to 2.3"
Outer diameter: Maximum
Internal diameter: 26mm ( 1.0")
75mm ( 2.9")