SATO CG2 Series Quick Manual page 40

Section 7: Turning On the Power
2.
Connect the printer to the AC adapter. Connect the AC adapter to the AC power outlet. When connecting
the DC power cord to the printer's power connector, make sure the DC power cord connector is oriented
properly. When connecting the DC power cord to the printer connector, use one hand to hold the printer
while using the other hand to plug in the cord.
Page 7-2
DC input power terminal DC input power terminal
(Power connector) (Power connector)
Make sure the flat side Make sure the flat side
of the DC power cord is of the DC power cord is
facing up. facing up.
Plug Plug
DC power cord DC power cord
CG2 Series Quick Guide