SATO CG2 Series Quick Manual page 13

Internal view when Top Cover is opened
17
18
19
20
21
22
23
24
25
CG208TT/ CG212TT
17 17 Print head
This component is used to print on the paper.
Perform maintenance at regular intervals.
18 18 Ribbon unit
Used to load the ribbon and wind up the used
ribbon.
Upper Gap sensor
19 19
Detects the gap of the label or center-hole in
the tag stock.
20 20
Roll media holder
To hold the roll media.
21 21
Media guide slide lever
Set to meet the size of the media used.
CG2 Series Quick Guide
CG208DT/ CG212DT
22 22
Supplied yellow microdriver
Used to adjust the potentiometers.
23 23
Lower Gap sensor
Detects the gap of the label or center-hole in
the tag stock.
24 24
I-Mark (Paper) sensor
Detects the I-Mark on the media.
25 25 Platen roller
This roller feeds the paper. Perform
maintenance at regular intervals.
Section 2: Names of Parts
17
19
22
20
21
23
24
25
Page 2-3