Boot Download Mode - SATO LM408 Operator's Manual

BOOT DOWNLOAD MODE

This download mode is used when the Firmware becomes corrupted and the normal download mode is not
successful. Allows the program to be downloaded from the host computer.
Figure 5-11 provides the specific sequence of events required by the operator, the printer, and the printer's
software. Use the printer's operator panel to select and enter the required options.
Refer to the Menu Definition Tables in the following chapter to provide an explanation of each menu screen.
LM408-412e Operator Manual
Unit 4: Printer Configuration
DSW6: ON
LINE + FEED + POWER
BOOT DOWNLOADER
PRESS FEED KEY
No action,
LINE
no change
PROGRAM DOWNLOAD
READY
No action,
LINE
no change
Send data from
host system
Printer
begins
receiving
data
PROGRAM DOWNLOAD
START > > >
Download
completed
DOWNLOAD COMPLETE
PRESS FEED KEY
FEED
Power printer off,
reset DSW6 to exit
Figure 4-11, Boot Download Mode
4-14
FEED
No action,
FEED
no change
END
No action,
LINE
no change
PN: 9001155A