Configuration Modes; Normal Mode - SATO LM408 Operator's Manual

CONFIGURATION MODES

This chapter provides an overview of the various configuration modes of the operation menu. All of the
configuration activities are performed via the use of the operator panel located on the printer's face. However,
many settings may also be controlled via external software commands. In the case of conflict between external
software commands and internal software commands (control panel settings) the printer will always use the last
valid setting.

NORMAL MODE

This mode allows configuration of printing features that are prone to change from job to job. These are some of the
most basic and common adjustments of all of the configuration modes.
Refer to the Menu Definition Tables in the following chapter to provide an explanation of each menu screen.
LM408-412e Operator Manual
Unit 4: Printer Configuration
POWER
ONLINE
QTY: XXXXXX
No action,
FEED
no change
OFFLINE
QTY: XXXXXX
LINE LINE + FEED
PRINT DARKNESS
1 2 3 4 5
Scrolls
LINE
options
PRINT SPEED
2 3 4 5 6
Scrolls
LINE
options
PITCH OFFSET
+00MM
Scrolls
LINE
options
FEED
CANCEL PRINT JOB
YES NO
Scrolls
LINE
options
Yes
FEED FEED
CANCEL PRINT JOB
COMPLETED
Figure 4-1, Normal Mode
4-4
LINE
FEED
FEED
Selects
and
advances
No
PN: 9001155A