SATO CG4 Series Operator's Manual page 27

2.5 CONNECTIONS (cont'd)
2.5.5 Turning On the Power
Warning
Do not operate the power switch or insert/remove the
power cable while your hands are wet. Doing so may
cause an electric shock.
Press the POWER on the operation panel of the unit.
The ERROR indicator displays red, then after a single beep
sound, the ON LINE (POWER) indicator displays green.
2.5.6 Turning Off the Power
When you have completed the printing job, turn the printer
off.
Be sure to confirm that the printer is in the offline status.
Press and hold the POWER button until the ERROR
indicator displays red and then turns off.
If there is any printed paper remaining in the printer,
cut it off.
CG4 Series Operator Manual
Section 2: Installation
ERROR
Beep
sound
ON LINE
(POWER)
ERROR
Page 2-13