SATO CG4 Series Operator's Manual page 20

Section 2: Installation
2.3 LOADING LABELS (cont'd)
After loading the media, turn on the power.
5.
The printer is online and the ON LINE (POWER) LED
lights green.
When the printer is ready, press the FEED/LINE button
to output the leading part of the media.
Caution
• When replacing media, bear in mind that the print head and its surrounding area remain hot.
Keep your fingers away from these areas to prevent injury.
• Avoid touching even the edge of the print head with your bare hands.
2.3.3 Overview of the Roll media and Fan-folded media loading path
Page 2-6
Roll media (Face-out)
Roll media (Face-in)
ON LINE
(POWER)
Fan-fold media
(Printed side face up)
CG4 Series Operator Manual