Advertisement
Installation – 564 SS (continued)
3
Install the face following the directions below.
The face is secured to the fireplace
c
with four screws. Two of the screws
are fastened to the upper brackets
with press nuts. The lower screws
are included with the face.
Plated Surfaces
Use denatured alcohol and a soft cloth to clean plated surfaces. Marks
left on the surface may damage the face.
Page 4 of 6
564 SS / 564 E Rectangular Face
Black 95400411
7/19/07
Nickel 95400413
Attach the upper brackets
a
to the face with the
included nuts.
Slide the face into place. The
b
tabs on the upper brackets insert
into the slots on the fireplace
brackets, holding the face in place
while the screws are tightened.
Denatured
Alcohol
Soft Cloth
© Travis Industries, Inc.
Advertisement
