FireplaceXtrordinair 564 SS FPX Manual
564 ss fpx arched face upgrade kit
Hide thumbs
Also See for 564 SS FPX:
- Installation instructions manual (6 pages) ,
- Brochure & specs (36 pages)
Advertisement
Quick Links
Compatibility:
• 564 SS Fireplace with FPX Arched Face
This upgrade kit (98500683) must be installed prior to installing the facing material or face.
Installation
1
Attach the brackets to the fireplace following the directions below.
Page 1 of 2
Upper
Left
Bracket
Identification
Lower
Left
564 SS FPX Arched Face
Upgrade Kit
Packing List:
• Tiling guide (2 pieces - left and right)
• (4) Mounting Brackets (attaches to the fireplace)
• (4) Screws
• (8) 8-32 Keps Nuts
Remove and discard the nuts and bushings
above and below the firebox.
Repeat these steps for the opposite side.
Upper
Right
Lower
Right
7/18/07
98500683
Discard the stock
bushings and nuts.
Upper
Bracket
Place the upper and lower brackets in place
and secure using the nuts included with this
kit.
Discard the stock
bushings and nuts.
Lower
Bracket
© Travis Industries, Inc.
Advertisement
Related Manuals for FireplaceXtrordinair 564 SS FPX
Summary of Contents for FireplaceXtrordinair 564 SS FPX
-
Page 1: Packing List
Attach the brackets to the fireplace following the directions below. Bracket Identification Page 1 of 2 564 SS FPX Arched Face Upgrade Kit Packing List: • Tiling guide (2 pieces - left and right) • (4) Mounting Brackets (attaches to the fireplace) •... - Page 2 Attach the tiling guide following the directions below. Page 2 of 2 564 SS FPX Arched Face Upgrade Kit Loosen the nuts on the upper brackets three turns (both sides). Slide both tiling guides into place. NOTE: the tiling guide has slots that slide between the brackets and the fireplace.