Saving A Pattern - Roland MC-808 Owner's Manual

Saving a pattern

Pattern settings that you edit will be lost if you edit another pattern or turn off the power.
If you want to keep the edited data, you must save it as follows.
1.
Select the pattern that you want to save.
2.
Press [WRITE].
The pattern name entry screen will appear.
fig.03-100
3.
Assign a name to the pattern.
Button Description
Moves the cursor (the location at
[CURSOR ]
which to enter/edit a character).
Hold down [SHIFT] Switches letters between uppercase
and press [INC] or and lowercase.
[DEC]
VALUE dial, Selects characters.
[INC] [DEC]
[UNDO/ERASE] Deletes the character at the cursor lo-
cation, while shifting the following
characters to the left, closing the gap.
Range: space, A–Z, a–z, 0–9, ! " # $ % & ' ( ) * + , - . / : ; < = >
? @ [ ¥ ] ^ _ ` { | } → ←
4.
When you have finished entering the name, press [ENTER].
A screen will appear in which you can select the pattern to
which the data will be written.
fig.03-101
* To cancel, press [EXIT].
5.
Press either [USER] or [CARD] to select the pattern group
into which you want to write the pattern.
U: User group
[USER]
The pattern will be saved in internal memory.
[CARD] C: Card group
The pattern will be saved on a card.
* You can't use the Card group unless a separately sold CompactFlash
card is inserted.
84
6.
Use VALUE dial or [INC] [DEC] to select the pattern to which
the data will be written.
The number and name shown in the display will change.
Range: U001–U800, C001–C800
7.
Press [ENTER].
You'll be asked to confirm your choice.
8.
To write the data, press [ENTER].
* To cancel, press [EXIT].