Converting The Note Timing Of A Pattern (Reclock) - Roland MC-808 Owner's Manual

Editing patterns (Pattern Edit)
8 Beat Rhumba type
Rhumb-Nm-L.Ac exact/low dynamics
Rhumb-Nm-H.Ac exact/high dynamics
Rhumb-Nm-L.Sw exact/light swing
Rhumb-Nm-H.Sw exact/strong swing
Rhumb-Hv-L.Ac dragging/low dynamics
Rhumb-Hv-H.Ac dragging/high dynamics
Rhumb-Hv-L.Sw dragging/light swing
Rhumb-Hv-H.Sw dragging/strong swing
Rhumb-Ps-L.Ac rushing/low dynamics
Rhumb-Ps-H.Ac rushing/high dynamics
Rhumb-Ps-L.Sw rushing/light swing
Rhumb-Ps-H.Sw rushing/strong swing
Others
Samba 1 samba (pandero)
Samba 2 samba (surdo and timba)
Axe 1 axe (caixa)
Axe 2 axe (surdo)
Salsa 1 salsa (cascara)
Salsa 2 salsa (conga)
Triplets triplets
Quituplets quintuplets
Sextuplets sextuplets
7 Against 2 seven notes played over two beats
Lagging Tri lagging triplets
Quantization will correct only note messages; other messages
are not corrected. This means that if messages that modify the
sound in real time (such as pitch bend) have been recorded in
the pattern, some Quantize settings may cause the timing of
these messages to become incorrect, so that they are no longer
played correctly. It is best to use Quantize on patterns that do
not contain messages that produce realtime change.
76
Converting the Note Timing of a
Pattern (RECLOCK)
This operation doubles or halves the note values of performance
data recorded in the pattern. For example, a four-measure pattern
recorded at tempo = 120 can be converted to a two-measure pattern
with halved note values, and played at tempo = 60 to produce the
identical playback. If you want to connect patterns whose tempo
differs drastically, you can use the Reclock operation to match the
note values of the two patterns.
fig.Reclock
DOUBLE
HALF
* Using the Reclock operation will not change the original tempo of the
pattern.
Parameter Range
Reclock Size HALF,
DOUBLE
* You cannot set this parameter in a way that would make the Reclock
operation produce a pattern longer than 998 measures or shorter than
1 measure.
Description
How the note values are to be
changed
HALF: Note values will be halved.
DOUBLE: Note values will be
doubled.