Auto Power Save Function - Icom IC-M71 Instruction Manual

7
SET MODE
D Auto power save function
The auto power save functon reduces current dran by deac-
tvatng the recever crcut for preset ntervals.
• ON : The power save functon s turned ON. The power save func-
ton wll be actvated when no sgnal s receved, and no oper-
aton s performed for 5 sec.
• OFF : The power save functon s turned OFF.
Power save ON
(default)
20
"
Push
Power save OFF
" D Self check function
The self check functon nforms you n case a problem s
found wth the rado. Self check automatcally and quck-
ly runs through ts dagnostc steps each tme the rado s
turned ON. Afterwards, the rado swtches to normal opera-
ton mode.
• Temperature : Outsde of –35°C to +73°C (approx.)
• Connected battery voltage
• Water ntruson
Self check OFF
(default)
When any of the bellow error messages appear, see the trou-
bleshootng secton of ths document for advce.
Battery voltage error
"
Push
Self check ON
(p. 30)
Temperature error Water intrusion
"