Interface Settings; Network - Ricoh C6055 Operating Instructions Manual

Interface Settings

This section describes the user tools in the Interface Settings menu under System Settings.
Default settings are shown in bold type.

Network

This section describes the user tools in the Network menu under Interface Settings.
Machine IPv4 Address
Specify the machine's IPv4 network address.
The default setting is Auto-Obtain (DHCP).
When you select [Specify], enter the IPv4 address and subnet mask as "xxx.xxx.xxx.xxx" ("x" indicates
a number).
When you select [Specify], make sure that IPv4 address is different from that of other machines on
the network.
The physical address (MAC address) also appears.
IPv4 Gateway Address
A gateway is a connection or interchange point between two networks.
Specify the gateway address for the router or host computer used as a gateway.
The default setting is 000.000.000.000.
Machine IPv6 Address
Displays the machine's IPv6 network address.
• Link-local Address
The machine's specified link-local address appears.
• Manual Configuration Address
The machine's manually configured address appears.
• Stateless Address: 1-5
The specified stateless address appears.
IPv6 Gateway Address
Displays the machine's IPv6 gateway address.
IPv6 Stateless Address Autoconfiguration
Specify IPv6 Stateless Address Autoconfiguration.
The default setting is Active.
Interface Settings
2
73