Ricoh C6055 Operating Instructions Manual page 201

6. Enter a sender name, and then press [OK].
Enter a destination name using Own Name or Own Fax Number.
7. Press [Full Agreement] or [Partial Agreement].
8. Select the item you want to program.
You must select only the item you want to program.
To cancel these settings, press [Cancel]. The display returns to that of step 5.
9. Press [OK].
A Special Sender is programmed.
To program another sender, repeat the procedure from step 5.
10. Press [Exit].
11. Press the [User Tools/Counter] key.
Special Senders to Treat Differently
4
199