Grandstream Networks, Inc - Grandstream Networks GXP1450 User Manual

Disable Conference
Disable DND Button
Disable Transfer
Auto-Attended Transfer
Configuration via
Keypad Menu
Enable STAR key
Keypad locking
Password to lock/unlock Enter the password to lock the keypad in web GUI.
Do not escape "#" as
%23 in SIP URI

Grandstream Networks, Inc.

Default is "No". If set to "Yes", conference will be disabled.
Default is "No". If set to "Yes", the "DND" button on keypad will be disabled.
Default is "No". If set to "Yes", transfer will be disabled.
Default is "No". If set to "Yes", the phone will use attended transfer by default.
Configures the access control of configurations via the phone keypad menu. There
are three modes:

Unrestricted

Basic Settings Only:
CONFIG option will not display in keypad MENU

Constraint Mode:

CONFIG, FACTORY FUNCTIONS and NETWORK options will not display
in keypad MENU
Default is enabled. When the phone is in idle screen, press and hold STAR key for
4 seconds and the keypad will be locked.
To unlock the keypad, press and hold STAR key for 4 seconds. Enter the password
to unlock in the prompted window, and then press MENU key to enter.
The password to lock/unlock can be configured. If users forget the password to
unlock it, log into web GUI and change the password. Update and reboot the
phone. When the phone boots up, press and hold STAR key for 4 seconds and
enter the new password to unlock it.
To unlock the keypad, enter the password in the prompted window in the phone's
LCD screen.
Default is "No". By default, # will be replaced as %23 in SIP URI.
GXP1450 User Manual
Firmware 1.0.1.110
Page 31 of 42
Last Updated: 01/2012