Turn On/Off Wi-Fi; Connect To Wi-Fi Networks - Grandstream Networks GXV3370 User Manual

Turn On/Off Wi-Fi

1. Go to GXV3370's Settings.
2. Touch Network.
3. Check or uncheck the option for Wi-Fi.
Or, users could open the top status bar and tap on WI-FI icon

Connect to Wi-Fi Networks

1. Once Wi-Fi is turned on, GXV3370 will automatically start the scanning within the range.
2. Go to GXV3370's Settings.
3. Touch Network.
4. Touch Wi-Fi Settings.
5. A list of Wi-Fi networks will be displayed as scanning result. Tap on the SSID and enter the correct password information to
connect to the selected Wi-Fi network.
6. The phone will start connecting to the Wi-Fi. The status bar will show Wi-Fi signal strength.
7. Once it is added and the password is remembered, the GXV3370 will connect to it again when the SSID is within the range.
8. The previous steps allow the GXV3370 to connect the Wi-Fi network with DHCP setting by default. If it needs to be
connected the Wi-Fi with static IP settings, please scroll down the setting window and tap to check the "Show advanced
options". Then the window will show up the IP settings at the bottom. If the Static is selected, the system will require end user
to input IP address, Gateway, Network prefix length and DNS 1 and DNS 2 addresses.
to turn it on/off.
Figure 169: GXV3370 Connect to Wi-Fi