Restore Factory Default Setting; Gxp1450 User Manual - Grandstream Networks GXP1450 User Manual

Sip enterprise phone

Hide thumbs Also See for GXP1450:

Table of Contents

Restore Factory Default Setting

WARNING:

Restoring the Factory Default Setting will delete all configuration information of the phone.

Please backup or print all the settings before you restoring factory default settings. We are not responsible

for restoring lost parameters and cannot connect your device to your VoIP service provider.

INSTRUCTIONS FOR

RESTORATION:

Step 1: Press "OK" button to bring up the keypad configuration menu, select "Config", press "OK" to

enter submenu, select "Factory Reset" (Please refer to Table 5-1 of keypad flow chart)

Step 2: Enter the MAC address printed on the bottom of the sticker. Please use the following mapping:

0-9:

0-9

22 (press the "2" key twice, "A" will show on the LCD)

222

2222

33 (press the "3" key twice, "D" will show on the LCD)

333

3333

Example: if the MAC address is 000b8200e395, it should be key in as "0002228200333395".

NOTE: If there are digits like "22" in the MAC, you need to type "2" then press "->" right arrow key to

move the cursor or wait for 4 seconds to continue to key in another "2".

Step 3: Press the "OK" button to move the cursor to "OK". Press "OK" button again to confirm. If the

MAC address is correct, the phone will reboot. Otherwise, it will exit to previous keypad menu interface.

Grandstream Networks, Inc.

Firmware 1.0.1.110

Page 42 of 42

Last Updated: 01/2012

Table of Contents