UNDERSTANDING HT503 VOICE PROMPT
HT503 has a built-in voice prompt menu for simple device configuration. The voice prompt menu is
designed for the FXS port only. To enter the voice prompt menu, press *** from the analog phone
connected to the FXS port.
Menu
Voice Prompt
"Enter a Menu Option"
Main Menu
"DHCP Mode",
01
"Static IP Mode"
"IP Address " + IP address
02
"Subnet " + IP address
03
"Gateway " + IP address
04
"DNS Server " + IP address
05
07
Preferred Vocoder
10
MAC Address
12
WAN Port Web Access
FIRMWARE VERSION 1.0.9.1
BASIC OPERATIONS
TABLE 5: HT503 IVR MENU DEFINITIONS
Options
Press "*" for the next menu option
Press "#" to return to the main menu
Enter 01-05, 07,10,12-17,47 or 99 menu options
Press "9" to toggle the selection
If using "Static IP Mode", configure the IP address information using
menus 02 to 05.
If using "Dynamic IP Mode", all IP address information comes from
the DHCP server automatically after reboot.
The current WAN IP address is announced
If using "Static IP Mode", enter 12 digit new IP address. You need
to reset the HT to take affect the new IP address.
Same as menu 02
Same as menu 02
Same as menu 02
Press "9" to move to the next selection in the list:
PCM U / PCM A
iLBC
G.726
G.723
G.729
Announces the MAC address.
Press "9" to toggle between enable / disable
HT503 USER MANUAL
Page 15 of 59